Putting the speakers into Set-Up mode

Phorus devices have two set-up modes: Standard and WPS. 

When you first bring your Phorus product home, it will automatically go into standard set up mode.  If you need to set up your speaker again, in another location or on a different network, you can easily re-enable set up mode.

  • Standard Set-Up Mode: To put the device into Standard Set-Up Mode, hold the Wi-Fi button down for 8 seconds.  You will hear a tone at 4 seconds, but do not release the button until after you hear the same tone again after the full 8 seconds.  The product will now be back in Standard Set-Up Mode, and the Wi-Fi light will slowly pulse on and off.
  • WPS Mode: To put the device into WPS Mode, hold the Wi-Fi button down for 4 seconds.  At 4 seconds you will hear a tone and the Wi-Fi light will begin to blink a pattern of two times on and then a pause and then repeat.  It is now ready for WPS pairing.

 

Have more questions? Submit a request